Home / Blog / SB 553 and Storefront Glass
California’s Workplace Violence Law (SB 553) and Your Storefront Glass: What the Plan Requires, What It Doesn’t, and Where Glass Fits
If you run a convenience store, a gas-station market or another late-night shop in Los Angeles or Orange County, you may have heard that California’s workplace violence law requires bullet-resistant glass or security film. We read the statute, Cal/OSHA’s guidance and drafts, and federal OSHA’s late-night retail recommendations. The short version: the law requires a written plan, a log, training and records, and it names no glass, film or window. This is general information, not legal advice.
Published November 19, 2026 · Armored Glass Solutions
The Short Answer
SB 553 requires a plan, not a product
California Labor Code section 6401.9, added by SB 553, requires employers to establish a written workplace violence prevention plan, keep a violent incident log, train employees and keep records. We read the section’s full text on November 18, 2026 and searched it for glass, glazing, window, film, bullet, camera, lighting, alarm and lock. None of those words appears. The statute’s only nod to physical measures is a definition of engineering controls: “an aspect of the built space or a device that removes a hazard from the workplace or creates a barrier between the worker and the hazard.” The section then never uses the term again.
So the decision about which corrective measures to take, hazard by hazard, belongs to the employer. Glass can be one of those measures. No glass or film product is a substitute for the plan itself.
Our own work is storefront glass: security window film, overglaze polycarbonate and door reglaze. Cashier enclosures and transaction booths are a separate trade; for those, ask a glazing contractor that builds them.
Who Is Covered
Who the law covers, and the provision most stores do not fit
Section 6401.9 says it “applies to all employers, employees, places of employment, and employer-provided housing”, with listed exceptions. One exception is for small workplaces.
That small-workplace provision has several conditions in its text. It covers “less than 10 employees working at the place at any given time and that are not accessible to the public, if the places are in compliance with Section 3203 of Title 8”. Read it as three conditions together: fewer than 10 employees at the place at any one time, a place the public cannot enter, and compliance with the injury and illness prevention program rule in section 3203. A convenience store or market that customers walk into does not meet the middle condition on the plain wording. Whether a particular business is covered is a question for Cal/OSHA or your own counsel.
The plan requirements have been operative since July 1, 2024. The statute says “Subdivisions (b) to (g), inclusive, shall be operative on and after July 1, 2024.” The section’s history line on the Legislature’s site showed no later amendment when we checked on November 18, 2026.
What The Law Requires
What the plan, the log and the training actually require
The plan must be in writing, and the statute says it “shall be available and easily accessible to employees, authorized employee representatives, and representatives of the division at all times”. It must also “be specific to the hazards and corrective measures for each work area and operation”. Required elements include the names or job titles of the people responsible, employee involvement in finding and correcting hazards, a way to report concerns without fear of reprisal, and training procedures. The plan is reviewed “at least annually, when a deficiency is observed or becomes apparent, and after a workplace violence incident.”
The part that matters for a storefront is hazard identification and correction. The plan must include scheduled periodic inspections, and the statute says “Inspections shall be conducted when the plan is first established, after each workplace violence incident, and whenever the employer is made aware of a new or previously unrecognized hazard.” It then calls for “Procedures to correct workplace violence hazards identified and evaluated in subparagraph (I) in a timely manner”. How to correct a hazard is left to the employer.
A retail robbery is what the statute calls Type 1 violence, defined as “workplace violence committed by a person who has no legitimate business at the worksite, and includes violent acts by anyone who enters the workplace or approaches workers with the intent to commit a crime.” The employer must keep a log: “The employer shall record information in a violent incident log for every workplace violence incident.” The log asks about circumstances such as “working in poorly lit areas, rushed, working during a low staffing level, isolated or alone, unable to get help or assistance”.
Training is due “initial training when the plan is first established, and annually thereafter”, and it covers “the corrective measures the employer has implemented”. Records are kept for set periods: hazard identification, evaluation and correction records “a minimum of five years” and violent incident logs the same. The division enforces the section by “the issuance of a citation alleging a violation of this section”. We did not look up penalty amounts, so we give none.
Guidance, Not Mandates
Where physical measures show up: guidance, not mandates
Cal/OSHA publishes a model plan for general industry. It says “Employers are not required to use this model WVPP.” We link to it and do not reproduce it, because the state limits commercial reuse of the document. Its inspection examples ask employers to look at the “Adequacy of workplace security systems, such as door locks, entry codes or badge readers, security windows, physical barriers, and restraint systems.” Cal/OSHA’s general-industry page lists risk factors that describe many late-night stores: “Exchange of money. Working alone. Working at night and during early morning hours.”
Federal OSHA has a late-night retail publication, OSHA 3153 (2009). It says “These recommendations are advisory in nature and informational in content.” By its own account it creates no new legal obligations. Its suggestions include “Ensuring the customer service and cash register areas are visible from outside the establishment” and “Installing physical barriers such as bullet-resistant enclosures with pass-through windows between customers and workers”. Its barrier example is an enclosure with a pass-through window, which is not the same thing as film on a storefront. None of the government documents we read mentions window film.
The Permanent Standard
The permanent Cal/OSHA standard: still a draft
SB 553 told the state to write a permanent standard: “the standards board shall adopt, no later than December 31, 2026, standards regarding the plan required by this section.” As of November 19, 2026, Cal/OSHA’s advisory page for the proposed section 3343 shows a September 2026 discussion draft and an October 27, 2026 advisory meeting as its latest items. The Standards Board’s proposed-regulations page has no notice for section 3343; its latest notices are dated October 30, 2026. Cal/OSHA’s workplace violence page still says the Board “is required to adopt the standard no later than December 31, 2026”. We found nothing in those pages that gives an effective date for a final standard. The statute’s own requirements, described above, are separate and already operative.
The September 2026 discussion draft is a draft, not law, and it may change. Its definition of engineering controls says the examples “include, as applicable, but are not limited to” a list, and the list names glass: “Enclosed workstations with shatter-, smash-, or bullet-resistant glass”; “Translucent glass (protects privacy, but allows employees to see where potential risks are)”; and “Adequate lighting in dark areas, sight aids, visibility improvements, and removal of sight barriers”.
Note what the glass example is: an enclosed workstation, not storefront film. A final standard could word all of this differently.
Visibility
Keep the window clear: visibility versus privacy film
Late-night guidance leans toward being able to see in and out. Federal OSHA’s checklist asks “Are windows and views outside and inside clear of advertising or other obstructions?” and “Is the cash register in plain view of customers and police cruisers to deter robberies?” It suggests “Limiting window signs to low or high locations and keeping shelving low so that workers can see incoming customers and so that police can observe what is occurring from the outside of the store”.
If your store holds an off-sale alcohol license, California Business and Professions Code section 25612.5 speaks directly to storefront glass. It says “No more than 33 percent of the square footage of the windows and clear doors of an off-sale premises shall bear advertising or signs of any sort”, and that signage must leave law enforcement “a clear and unobstructed view of the interior of the premises, including the area in which the cash registers are maintained, from the exterior public sidewalk or entrance to the premises”. The section does not mention film or tint, so we cannot tell you how it treats any particular film. Our post on city window-sign rules in LA and Orange County covers how local caps meet film.
The draft’s list puts translucent glass and the removal of sight barriers side by side and gives no specification for either. Our reading, not the sources’: for a cash-register sight line, clear film keeps the view, and frosted, dark, reflective or full-coverage decorative film works against everything quoted above.
Where Film Fits
Where film and overglaze fit: options, not obligations
Nothing above makes any glass product mandatory, so what follows is where our work fits if your own hazard review points to the storefront. Security window film on storefront glass and doors is engineered to resist breakthrough and can slow a smash-and-grab or forced entry, which buys time. We will not claim it defeats a determined attacker. It matters most when the store is closed or when someone goes at the glass. It does not address a robbery at the register during open hours.
Where a storefront needs more than film, overglaze polycarbonate is a panel system installed over existing glass, and door reglaze replaces the glass in an existing door. Whatever you consider, ask the maker or installer for documentation on the exact assembly, frame and anchoring included.
Security film is not a ballistic rating and it is not a cashier enclosure. The enclosures federal OSHA describes, and the enclosed workstations in the draft, are a separate trade: if you want one, ask a glazing contractor that builds them. Our ratings guide explains what each forced-entry and ballistic rating actually tests. Other cash-and-product retail categories read the same way, and we cover pharmacies, bank branches and credit unions and cannabis dispensaries in separate posts.
In Your Plan
How storefront glass would show up in your plan
If a hazard inspection finds that the storefront glass is a problem, the plan’s job is to record it, not to name a product. A break-in is also a trigger: the statute calls for an inspection after each workplace violence incident. Write down the hazard, how you evaluated it, and the correction you chose. Keep any maker documentation with those records, and tell employees about the change in training. A film or glass change is one possible item inside the plan. It does not replace the written plan, the log, the training or the records.
Before You Order Anything
Questions to ask before you spend money
- What did our hazard inspection actually find? The plan starts with identifying and evaluating hazards. Glass is only one possible correction.
- Does the small-workplace provision apply to us? It has several conditions. Ask Cal/OSHA’s consultation service or your own counsel rather than assuming.
- Do we hold an off-sale alcohol license? If so, section 25612.5 limits window signs and asks for a clear view of the cash registers.
- Clear or frosted? Ask which options keep the view in and out of the store.
- Is this film, an overglaze panel or an enclosure? Enclosures and transaction booths are a different trade. Ask for the maker’s documentation on the exact assembly, frame and anchoring.
- Landlord and permit? If you lease, ask your landlord before changing storefront glass, and ask the building department whether the work needs a permit.
Prefer to talk it through? Call us at (310) 488-5626 or 888-960-TINT. We will tell you what we do and what belongs to another trade.
Questions
SB 553 and storefront glass: FAQ.
Does SB 553 require security film or bullet-resistant glass at my store?
Not in the statute's text. We searched the full text of Labor Code section 6401.9 and it has no mention of glass, glazing, window, film or bullet. It requires a written plan, a violent incident log, training and records, and it leaves the choice of corrective measures to the employer. A discussion draft of a future Cal/OSHA standard lists “Enclosed workstations with shatter-, smash-, or bullet-resistant glass” as an example, “as applicable,” but it is a draft, not law, and it may change.
Does having fewer than 10 employees take my store out of the workplace violence plan requirement?
The statute's small-employer provision has more than one condition. It covers “less than 10 employees working at the place at any given time and that are not accessible to the public, if the places are in compliance with Section 3203 of Title 8”. A store that customers walk into does not meet the “not accessible to the public” condition on its plain wording. Whether a particular business is covered is a question for Cal/OSHA's consultation service or your own counsel.
Is the permanent Cal/OSHA workplace violence standard in effect yet?
Not that we could find, as of November 19, 2026. The statute told the Standards Board to adopt standards “no later than December 31, 2026”. Cal/OSHA's advisory page shows a September 2026 discussion draft and an October 27, 2026 advisory meeting as its latest items, and the Standards Board's proposed-regulations page has no notice for section 3343. The statute's own requirements, operative since July 1, 2024, are separate from that standard.
Will privacy or tinted film on my storefront cause a problem with visibility rules?
It can work against what the sources ask for. Federal OSHA's late-night retail guidance asks “Are windows and views outside and inside clear of advertising or other obstructions?” If you hold an off-sale alcohol license, Business and Professions Code section 25612.5 says signage must leave law enforcement “a clear and unobstructed view of the interior of the premises, including the area in which the cash registers are maintained”. That section does not mention film or tint, so we cannot tell you how it treats a particular film. Clear film keeps the view; frosted, dark or reflective film across a cash-register sight line is the thing to question first.
Can window film be part of my workplace violence prevention plan?
Film could be one corrective measure an employer chooses, if the hazard inspection points to the storefront glass. The statute calls for “Procedures to correct workplace violence hazards identified and evaluated in subparagraph (I) in a timely manner” and does not say how. Film is not a substitute for the written plan, the log, training or records, and it does not address a robbery at the register during open hours. Keep a record of the hazard, the evaluation and the correction; hazard records are kept “a minimum of five years”.
Sources
Where these findings came from.
We read the statutes and agency pages below on November 18, 2026 and re-checked the status of the permanent standard on November 19, 2026. Agency guidance and discussion drafts are not law and change often. We did not read penalty provisions, local ordinances or the full bill text. Confirm current text with the source before you rely on any of this.
- California Legislative Information, Labor Code section 6401.9 (SB 553). State statute. Link.
- California Legislative Information, Business and Professions Code section 25612.5. State statute. Link.
- Cal/OSHA, Workplace Violence Prevention in General Industry and Workplace Violence guidance pages. State agency. General Industry; Hub.
- Cal/OSHA, Workplace Violence Prevention in General Industry advisory meetings (proposed section 3343), including the September 2026 discussion draft and the October 27, 2026 agenda. Discussion draft, not law. Link.
- California Occupational Safety and Health Standards Board, Proposed Regulations. State agency. Link.
- Cal/OSHA, Model Workplace Violence Prevention Plan for General Industry (February 2024). Optional template. Link.
- U.S. Occupational Safety and Health Administration, Recommendations for Workplace Violence Prevention Programs in Late-Night Retail Establishments, OSHA 3153 (2009). Federal advisory publication. Link.
Keep Reading
Related reading.
Storefront Window Film and City Window-Sign Rules in LA and Orange County
How city window-sign caps and visibility rules meet film on a storefront.
Read the post →Security Glass for California Pharmacies: What DEA and Board of Pharmacy Rules Say (and What They Don't)
Another retail category where the rules are detailed about drugs and keys, and quiet about glass.
Read the post →California’s Indoor Heat Rule (Cal/OSHA § 3396) and Sun-Facing Glass
What the indoor heat rule requires, where window film fits, and what it doesn’t do.
Read the post →Thinking about your storefront glass?
Start with your hazard inspection and your written plan. If the storefront turns out to be part of it, call us and we will talk through what film or overglaze polycarbonate can and cannot do, and what belongs to another trade. Call (310) 488-5626 or 888-960-TINT.