Serving Los Angeles & Orange County · Commercial · Storefront · Institutional · Residential
Licensed CA Contractor #997737 · (310) 488-5626 · 888-960-TINT
CERAMIC SOLAR FILM — infrared heat stopped at the glass, your view left alone · Free written quote →

Home / Solutions / Security Window Film

Security Window Film

The highest-value glass hardening there is: multi-layer film bonded to your existing windows, anchored to the frame, engineered to turn a 5-second break-in into minutes of loud, visible failure.

Real footage — that’s Mike swinging, at a manufacturer demo: it breaks. It holds. That’s the product.

The Problem

Annealed glass can fail in one swing.

Standard storefront and office glass offers very little delay. One hard strike can leave an intruder with a clean opening, and a smash-and-grab is built around being in and out fast.

Security film changes the outcome. The glass still breaks — but it stays together as a tough, anchored membrane that has to be beaten out of the frame piece by piece. That noise, time, and visibility is what actually stops burglaries: in our experience, burglars give up fast when the opening holds.

  • 4–15 mil standard constructions; riot-grade stacked systems (RiotLite®) at 27–41 mil
  • Mechanical or wet-glaze attachment anchors film to the frame
  • Helps hold broken glass together in earthquakes, impacts & blasts — see blast mitigation & anti-shatter film
  • Combine with solar film performance in a single product

Spec Levels

Good, better, best — matched to your threat.

We're brand-independent: these tiers can be filled by any major manufacturer's line. You'll see data sheets side by side before you sign anything.

TierTypical constructionBest forWhat it does
Good 7–8 mil film, edge-bonded Offices, homes, upper floors Holds fragments on breakage; deters opportunistic entry; may reduce falling glass fragments in an earthquake.
Better 12–15 mil multi-layer + wet-glaze attachment Storefronts, ground-floor glazing, schools Meaningful forced-entry delay — the film stays anchored to the frame under repeated strikes.
Best 15 mil + mechanical attachment, or step up to DefenseLite® High-value retail, pharmacies, repeat-target locations Maximum film-based delay; where the threat justifies it, we quote retrofit glazing alongside.

Film alone is not a forced-entry-rated barrier. Where codes, insurers, or the threat demand rated protection, see DefenseLite® & BulletShield®.

Applications

Where security film earns its keep.

Storefronts

Display windows and glass entry doors — a common smash-and-grab target in LA & OC retail corridors.

When film isn’t enough →

Schools

Entry vestibules and classroom sidelites — added delay when it matters most.

Get a campus assessment →

Offices

Ground-floor glazing, server rooms, and interior glass around sensitive areas.

Get a building assessment →

Homes

Sliders, French doors, and ground-floor windows — commercial-grade protection at home.

Get a home assessment →

Questions

Security film FAQ.

Will security film make my windows burglar-proof?

No film makes glass impenetrable — anyone who claims otherwise is selling. What film does is add delay, noise, and visibility, which is what makes intruders quit. For rated forced-entry or ballistic protection, we install DefenseLite® and BulletShield® retrofit systems.

What is an attachment system and do I need one?

An attachment system bonds the filmed glass to the window frame — either a structural silicone bead (wet glaze) or a mechanical batten. Without it, a broken filmed pane can be pushed out of the frame in one piece. For ground-floor forced-entry protection, we almost always spec one; for fragment-retention and upper floors, edge-bonded film is often enough.

Can I get security and solar performance in one film?

Yes — most major manufacturers make combination films that pair 8–15 mil security constructions with heat- and glare-rejecting coatings. One install, both benefits. We'll spec options across brands.

How long does installation take?

A typical storefront is done in a day, usually after hours so you never close. Larger programs are phased around your operations. Film cures over a short period during which slight haze is normal.

Keep Reading

Is window film “safety glass”?

What ANSI Z97.1 and 16 CFR 1201 actually test, where California code requires safety glazing, and what film can and can’t do about it.

Read the post →

How long does security film last?

What actually wears film out — and how narrowly “lifetime warranty” is defined.

Read the post →

Does window film help in an earthquake?

What FEMA E-74 says about film, what one industry-funded lab study found, and where the sources disagree on attachment.

Read the post →

Get a security film spec for your glass.

Free on-site assessment anywhere in LA & Orange County. Written spec, side-by-side data sheets, no brand quota.

Request Assessment
CALL TEXT QUOTE