Serving Los Angeles & Orange County · Commercial · Storefront · Institutional · Residential
Licensed CA Contractor #997737 · (310) 488-5626 · 888-960-TINT
CERAMIC SOLAR FILM — infrared heat stopped at the glass, your view left alone · Free written quote →

Home / Blog / Storefront Window Film and City Window-Sign Rules

Storefront Window Film and City Window-Sign Rules in LA and Orange County: What to Check Before You Frost or Tint the Glass

If you run or lease a storefront in Los Angeles or Orange County and are thinking about frosting, tinting or covering part of the glass, your city’s sign code may put a percentage on how much of a window can carry signs. We read the code text for seven cities and California’s alcohol regulator to see what they say. The short version: the caps run from 10% to 33%, each is measured against a different base, and the text we read is silent on frosted, tinted and clear film. This is general information, not legal advice.

Published November 14, 2026 · Armored Glass Solutions

The Short Answer

Two rulebooks apply to the same glass: your lease and your city

A tenant who wants to frost, tint or cover part of a storefront usually thinks about one approval, the landlord’s. There is a second rulebook, the city’s sign code, and in every city we looked at it puts a percentage on how much of a window can carry signs. We read the code text for seven cities in Los Angeles and Orange County, plus California’s alcohol regulator, to see what they say. Our read dates are November 12 to 14, 2026, and we confirmed each cap on the city’s own code site on November 14.

The caps we read are 10% in Los Angeles and Long Beach, 20% in Anaheim, Costa Mesa and Huntington Beach, and 25% in Brea and Pasadena. California ABC’s page for Type 20 and 21 licensees says 33%. Each one is measured against a different base, and the definitions of a sign turn on a message or graphic. The part most tenants want answered is whether frosted, tinted or clear film counts toward a cap. The code text we read is silent on that. Only Long Beach names “dark window tinting,” and only for specific business categories.

On the lease half, our post on window film in a rented home or leased storefront quotes a sample clause that bars covers, materials or signs on any window “without Landlord's prior written consent.” That is a private rule, and clearing it does not answer the city question. This post is general information, not legal advice, and it is not a conclusion about any particular film on any particular window.

Definitions

What counts as a “window sign” in the code text we read

Most of these codes define a window sign by where it is and what it says, not by what it is made of. Los Angeles defines a window sign as one “attached to, affixed to, leaning against, or otherwise placed within six feet of a window or door in a manner so that the sign is visible from outside the building.” Its definition of a sign is any display used to “present a message and attract the attention of the public.” The six-foot reach means something standing inside near the glass can be measured too.

Other cities reach inward as well. Anaheim’s window sign is anything “designed to communicate information about an activity, business, commodity, event, sale, or service” that is applied to a window or “located within five (5) feet of the inside of a window.” Pasadena says “Signs within three feet of a storefront window shall be counted as a window sign.” Brea’s definition covers a sign “painted, attached, glued, or otherwise affixed to a window,” and its general definition of a sign covers displays that “advertises, informs, or identifies.”

Pasadena’s definition is the widest we read. It lists “forms, patterns, colors, textures, shadows” and ties them to a display made “for the purpose of advertising, identifying or calling visual attention.” Across all the cities, the trigger is a message, a graphic or an attention-getting display. None of the definitions we read says the glass or a film is a sign by itself.

The Caps

The caps, city by city, and what each one is measured against

Here is what we read. The base matters as much as the percentage, because the same layout can be measured three different ways.

Caps as we read the code text in November 2026. Zone and district limits apply; the caps are not interchangeable from one city to the next.
CityCap we readMeasured againstSection
Los Angeles10%“the area of the window”LAMC § 14.4.14 A
Long Beach10%Total window area, each window calculated separatelyLBMC § 21.44.500, Table 44-4
Anaheim20%Total transparent area of any window surfaceAMC § 18.44.110 .070
Costa Mesa20% (50% permanent plus temporary)Contiguous window areaCMMC Table 13-115; § 13-111
Huntington Beach20% (50% in December)Visible area of a windowHBZC §§ 233.08 L, 233.22 C
Brea25%Total transparent area of any windowBMC § 20.28.160
Pasadena25%Each window areaPZC Ch. 17.48, Tables 4-20 and 4-21
California ABC33%, Type 20 and 21 licensees onlySquare footage of windows and clear doorsB&P § 25612.5(c)(7), as cited on ABC’s page

A few details change how the numbers work. Los Angeles repeats its 10% for temporary signs and defines a temporary sign as one “not to exceed 30 days.” Long Beach’s table adds that each window “shall be calculated separately” and that its window-sign item reads “Must be placed in such a manner so as to not obstruct visibility into business”. Anaheim’s 20% counts signs that “obscure or when viewed from public property appear to obscure” the glass, and it states that “Negative or clear spaces between graphics shall also be included as a part of the sign area,” so for a sign, the framed rectangle around it, clear spaces included, is what gets measured. The same Anaheim text addresses the outside of the glass: “No signs shall be allowed on the outside of any windows of commercial or industrial buildings.”

Costa Mesa’s table caps permanent window signs at “20% of contiguous window area maximum” in all four zone columns, residential through institutional, and says “Total of permanent and temporary window sign area shall not exceed 50% of contiguous window area.” Temporary window signs get 20% in the commercial and industrial columns and are marked “Prohibited” in the residential and institutional ones. “Contiguous” means panes “separated only by vertical or horizontal mullions that are three inches wide or less,” so a wide column breaks a storefront into separate measurements.

Huntington Beach words its figure as an exemption from sign permits: “window signs not exceeding 20% of the visible area of a window (50% during December).” A separate section there covers windows “covered by paper or painting signs” over 20% of the window, with the same December exception. Brea’s section says no sign may “obscure more than twenty-five percent (25%) of the total transparent area of any window.” Pasadena’s tables carry the line “Window signs, 25% max of each window area,” and its code adds that permanent and temporary window signs combined cannot cover more than 25 percent of any window.

Two cautions. First, these caps apply in the zones and districts each code names. We did not read specific plans, sign districts or overlay rules, which can differ. Second, the numbers above are what the code said when we read it. Cities amend their codes, and Costa Mesa amended Title 13 as recently as October 2026. The planning counter can tell you which text is in force on your job date.

Where The Code Is Silent

Frosted, tinted and clear film: what the text says, and what it does not

We searched the window provisions for the words frosted, tint, translucent, film, etched and decal. The Los Angeles sign article, Brea, Anaheim, Costa Mesa, Huntington Beach, Pasadena and the Long Beach window-sign table had no hit that addresses film on glass. Where a code is silent, the text we read does not say whether frost or a tint counts toward a cap, and we are not going to guess.

The cities do give a few hints about how a planner might think. Brea’s cap is worded around how much of the transparent area a sign may “obscure,” and Anaheim’s adds “appear to obscure.” Both are tied to a sign, and neither mentions film. Anaheim’s “clear spaces between graphics” and Pasadena’s “patterns, colors, textures” matter most when a design includes lettering or a logo cut from a frosted field. Whether the frosted field then counts as part of the sign is not answered by any text we read.

The one place tint appears by name is Long Beach’s use-specific standards. For check cashing and similar financial services, and for amusement and entertainment facilities, the text says “Windows shall not be obscured by placement of signs, dark window tinting, shelving, racks or similar obstructions.” That applies to those use categories, not to retail generally.

Plain clear film, such as safety or security film with no printed or cut graphic, is the same story. Every sign definition we read is triggered by a message, a graphic or a display, and none of them addresses clear film either way. We did not read a city interpretation that does. For that reason we do not say it counts, and we do not say it does not.

Visibility Rules Beyond The Sign Code

Restaurants, markets and licensed businesses

Some visibility rules sit outside the sign chapter. Long Beach’s use standard for alcohol beverage manufacturing and tasting rooms says no more than ten percent of the windows and transparent doors may bear advertising, signs or other obstructions, and that they must be placed to keep “a clear and unobstructed view of the establishment's interior.” If you run that kind of business there, read the section itself.

At the state level, California ABC’s page for retail licensees lists a signage requirement for Type 20 and 21 licensees: “No more than 33% of the square footage of the windows and clear doors may have advertising or signs of any sort.” It adds that signage must leave law enforcement a “clear and unobstructed view of the interior of the store from the outside,” including the register area. A separate line for all licensees says signs “must not obstruct the view of the interior of the premises from the street.” We read these on ABC’s own page. The page does not name restaurants or bars, we did not read the statute itself, and we did not research license conditions on individual licenses, so confirm your own license with ABC. The 33% is not a number for every business that sells alcohol, and the page does not say whether film counts as an obstruction.

Cannabis retailers have their own set of window and visibility rules. We covered them in security glass for California cannabis retailers, so we are not repeating them here.

Before The Film Goes On

A pre-install checklist for tenants and landlords

  • Which zone is the parcel in? The caps apply where each code names them. Ask the planning counter which sign rules cover the address, including any specific plan or sign district.
  • Which windows are measured together? Costa Mesa measures contiguous panes, Long Beach measures each window separately, and several cities reach signs placed three, five or six feet inside the glass.
  • What share of the glass will the film and graphics cover? Count lettering, logos and cut-outs, and in Anaheim count the framed rectangle around a sign, including clear spaces.
  • Is the film inside or outside? Anaheim’s text addresses the outside of windows. Where the film sits on the glass is a question to put to the counter.
  • Does the code name film or tint for your use? Only Long Beach names “dark window tinting,” for specific uses. Check the use-specific standards for your business type.
  • Does a license add its own window rule? If you hold an ABC license, ask ABC about coverage and visibility, including any conditions on the license.
  • Is the landlord’s written consent in hand? Get it before the install date, with the film described.
  • Did you ask the planning counter in plain words? Describe the film, the percentage of glass, and any graphics, and ask whether the sign code reaches it.

Where We Fit

What we install, and what belongs to you or your landlord

We install window film, overglaze polycarbonate and door reglaze across Los Angeles and Orange County. For a storefront that means decorative and frosted film, privacy film, anti-graffiti film and security film. We do not decide whether a sign code applies to a design, and we do not apply for sign permits. That question belongs to the tenant or the landlord and the city’s planning counter.

What we can do is look at the glass with you. We can talk through which windows are contiguous, where a film would sit and how much of each pane it would cover, so you can describe the job accurately when you call the city. If you want to talk it through, use our contact page.

Questions

Storefront window film and city sign rules: FAQ.

How much of a storefront window can be covered by signs or film in LA and Orange County?

It depends on the city and on how the city measures. In the code text we read in November 2026, the caps are 10% in Los Angeles and Long Beach, 20% in Anaheim, Costa Mesa and Huntington Beach, and 25% in Brea and Pasadena. Each is measured against a different base, such as the area of the window, the total transparent area, or contiguous window area, and some apply only in named zones. Costa Mesa adds a 50% combined cap for permanent and temporary signs. Ask your city's planning counter how your parcel and your glass are measured. This is general information, not legal advice.

Does frosted film count as a window sign?

The code text we read does not say. In the Los Angeles, Brea, Anaheim, Costa Mesa, Huntington Beach, Pasadena and Long Beach window provisions we searched, the words frosted, film and translucent do not appear. The definitions of a sign or window sign turn on a message, graphic or display, such as Anaheim's words “designed to communicate information.” Anaheim and Pasadena use wording about obscuring, clear spaces, patterns and textures that a planner might apply to a decorative layout, but we did not find an interpretation either way. Ask the planning counter before you frost a storefront.

Does clear security film count toward the window-coverage limit?

The code text we read does not address plain clear film either way. Every sign definition we read is triggered by a message, graphic or display, not by the glass or a film on it, and none of the window provisions names clear film. We did not read any city staff interpretation. If a layout adds printed or cut graphics to clear film, that is a different question, so describe the whole design when you ask the planning counter.

Do restaurants and liquor-selling businesses have different window rules?

Possibly. Long Beach's use-specific standards for alcohol beverage manufacturing and tasting rooms call for a clear and unobstructed view of the interior, and its standards for check cashing and amusement facilities name “dark window tinting.” California ABC's page for Type 20 and 21 licensees says no more than 33% of the square footage of windows and clear doors may carry advertising or signs. That page does not name restaurants or bars, and we did not read the statute itself, so confirm your license type and any license conditions with ABC.

Do I need my landlord's approval or the city's first?

Both questions are separate, and we would ask both. A lease can require the landlord's written consent before anything goes on the glass; our post on leased storefronts covers that. The city question is about the sign code, which we read for the cities above. Some of the codes we read treat a small window sign as exempt from a sign permit, such as Brea's 25% and Huntington Beach's 20%, but none of the text we read says what a film installation needs. The permit application, if any, belongs to the tenant or landlord. Ask the planning counter.

Sources

Where these findings came from.

We read the city code text and the ABC page below in November 2026, and confirmed each figure on the city’s own code site on November 14, 2026. We did not read specific plans, sign districts, other cities or unincorporated areas, the text of the Business and Professions Code sections ABC cites, individual ABC license conditions, or any city staff interpretation of film on glass. Codes are amended, so confirm the current text with your city’s planning counter before you rely on any of this. This post is general information, not legal advice.

  1. City of Los Angeles, Los Angeles Municipal Code, Article 4.4 (Sign Regulations), sections 14.4.2, 14.4.14 and 14.4.16. Municipal code, American Legal Publishing. Article 4.4; 14.4.14; 14.4.16.
  2. City of Anaheim, Anaheim Municipal Code, Chapter 18.44 (Signs), sections 18.44.020, 18.44.110 and 18.44.210. Municipal code, American Legal Publishing. 18.44.110; 18.44.210; definitions.
  3. City of Long Beach, Long Beach Municipal Code, Title 21, section 21.44.500 (Table 44-4) and Chapter 21.45 (sections 21.45.114, 21.45.115.5 and 21.45.116). Municipal code, Municode. Chapter 21.44; Chapter 21.45.
  4. City of Costa Mesa, Costa Mesa Municipal Code, Title 13, Table 13-115 and section 13-111 (Title 13 as amended by Ordinance 2026-08, adopted October 6, 2026). Municipal code, eCode360. Table 13-115; 13-111.
  5. City of Huntington Beach, Huntington Beach Zoning and Subdivision Ordinance, Chapter 233, sections 233.08, 233.22 and 233.28. Municipal code, eCode360. Link.
  6. City of Brea, Brea Municipal Code, Chapter 20.28 (Signs), sections 20.28.020, 20.28.080 and 20.28.160. Municipal code, eCode360. Chapter 20.28; 20.28.160.
  7. City of Pasadena, Pasadena Zoning Code, Title 17, Chapter 17.48 (Signs). Municipal code, Municode. Link.
  8. California Department of Alcoholic Beverage Control, Signage Requirements and Ideas for Retail Licensees. State agency guidance. Link.

Keep Reading

SB 553 and your storefront glass

What California’s workplace violence plan law requires, why it names no glass, and what Cal/OSHA’s unadopted draft lists.

Read the post →

Decorative and frosted film on office glass walls and doors

What to check before frosted or decorative film goes on glass: glass type, exit doors, fire-rated glass and what the data sheets say.

Read the post →

Security glass for California cannabis retailers

What the state’s cannabis rules say about door locks, alarms and cameras, silence on storefront glass, and where dark film can conflict.

Read the post →

Planning film for a storefront?

Call us and we will walk the glass with you: which windows are contiguous, where the film would sit and how much of each pane it would cover. Then you can describe the job accurately to your landlord and your city’s planning counter. Call (310) 488-5626 or 888-960-TINT.

Get a Free Assessment
CALL TEXT QUOTE