Serving Los Angeles & Orange County · Commercial · Storefront · Institutional · Residential
Licensed CA Contractor #997737 · (310) 488-5626 · 888-960-TINT
CERAMIC SOLAR FILM — infrared heat stopped at the glass, your view left alone · Free written quote →

Home / Blog / Security Glass for Jewelry Stores

Security Glass for Jewelry Stores: What Insurers, UL 972 and California Rules Actually Ask For (and What They Don't)

If you own an independent jewelry store in Los Angeles or Orange County, or you lease one to a jeweler, you may have heard that your insurer or the state requires a certain kind of glass. We read what Jewelers Mutual Group, the Jewelers’ Security Alliance, UL and California’s statutes actually say. The short version: advice, not requirements, and the biggest risks do not always come through the window. This is general information, not legal or insurance advice.

Published November 16, 2026 · Armored Glass Solutions

The Short Answer

Insurers and JSA recommend stronger glass; nothing we read requires it

We read published guidance from Jewelers Mutual Group, an insurer that writes jewelers block coverage, and the 2025 Annual Crime Report from the Jewelers’ Security Alliance (JSA), a nonprofit trade crime-prevention association. Every glazing sentence in them is advice. Jewelers Mutual’s smash-and-grab tips say to “consider applying U.L. certified impact resistant glazing materials or laminated glass to the sides, fronts and tops of your display cases.” None of the pages we read says a particular glass, film, UL 972 material or safe class is required for coverage.

That is not the same as saying your policy requires nothing. Policy wording is not public, and Jewelers Mutual’s own product page says its descriptions “are not part of any policies, nor a substitute for the actual policy language.” So ask your agent whether your policy requires anything for glass, display cases or safes, and get the answer in writing.

Our own work here is the storefront: security film on storefront glass and doors, overglaze polycarbonate over existing storefront glass, and door reglaze. Display cases are a separate product, made and supplied by others.

How Stores Get Hit

What JSA’s 2025 report says about how jewelry stores get hit

JSA’s numbers come with limits, and they matter. JSA says its statistics are based “solely on case-specific information reported to or obtained by JSA,” that “many go unreported, even to law enforcement,” and that “The loss values reported should be considered conservative and may be greater than indicated.” Treat every figure below as a partial picture.

JSA files smash and grabs under robbery, defined to include crimes “where hammers or other types of objects are used to smash the display cases.” Burglary, in JSA’s definition, “Includes safe attacks, 3-minute burglaries, and front window smashes while the store is closed.”

First, the in-store case smash. JSA counted 137 smash and grab robberies in 2025, the same number as in 2024. In that crime the target is the display case, not the front door.

Second, the overnight storefront burglary. JSA reports 262 burglaries in 2025, and 56 of them were what it calls “Three Minute Burglaries,” “usually committed in the middle of the night by smashing a glass front door or window of a retail establishment and then smashing display cases and stealing out-of-safe merchandise.” Jewelers Mutual makes the same point about timing: “alarms and surveillance systems are not deterrents by themselves since burglars are in-and-out in three minutes or less.” In this crime the storefront glass is literally the first step.

Third, the attacks that go around the glass. JSA’s 2025 entry-point table for all burglaries lists wall at 19.1%, roof at 9.5%, window at 13.0% and front door at 6.9%. JSA says safe and vault attacks increased from 31 in 2024 to 37 in 2025, and reports an average loss of $1.1 million in a burglary involving a safe attack, against roughly $42,000 for an average Three Minute Burglary. The honest picture is mixed. Glass is where many burglaries start, but the largest losses JSA reports come through safes, and walls and roofs are entry points too.

California context, under the same JSA limits. JSA’s 2025 state tables list California at 28.9% of robberies and 24.0% of burglaries. JSA pairs that with store count: its note says California has 10,723 jewelry retailers as of April 2026, and that California “also has the most jewelry locations, and has traditionally led the U.S. in jewelry crime.” JSA publishes no per-store rate and no Los Angeles or Orange County breakdown, so we do not claim either.

UL 972

UL 972: what it covers, and what it leaves out

UL 972, Burglary Resisting Glazing Material, is current. UL Standards & Engagement lists Edition 6, published in 2006 and reaffirmed October 8, 2025, with “No technical changes have been made.” Its scope covers glazing material “principally as a substitute for plate glass show windows or show case panels,” and the material “is intended to resist burglarious attacks of the ‘hit and run’ type.”

It has two limits worth knowing. First, mounting. The scope says “These requirements do not cover the glazing (mounting) methods used for the installation of burglary resisting glazing material.” A UL 972 material in a weak frame is not a UL 972 showcase, and Jewelers Mutual makes the same point about installation. Second, severity. The Department of Defense’s unified facilities guide specification for glazing says “A steel ball is dropped a number of times from different heights,” that testing is standardized “rather than subjecting the specimen to actual physical attack simulations,” and that it is “at a level below the ‘very low forced entry severity level.’” So it is a hit-and-run screen, not a simulation of a crew working on the glass.

As we read the scope, UL 972 is not described as a ballistic rating or a timed forced-entry rating, and we found no source saying any film, by itself, carries a UL 972 listing. Security film is not a ballistic product and is not a UL 972 rating by itself, and we do not describe it as either. If a quote cites UL 972, ask for the maker’s listing or report for that exact material. Safes are a different standard: UL 687 defines classes such as TL-15, TL-30 and TRTL-30, and neither rating transfers to the other. Our ratings guide covers the rest.

What Is Recommended

What Jewelers Mutual and JSA actually recommend

For display cases, the advice converges on laminated glass and a sound frame. Jewelers Mutual’s showcase article says “Laminated glass is the most secure option, resisting breakage better than tempered or annealed glass,” and of tempered glass: “Unfortunately, it does little to safeguard the jewelry beneath it.” It adds: “Your business could use the strongest glass ever created, but installing it incorrectly could lead to failure.” In JSA’s words, “Showcases with burglary-resistant, laminated glass on the front and sides, and special frames, can withstand many blows with a hammer and can prevent or reduce large losses.”

The first overnight advice is procedural. Jewelers Mutual: “Regrettably, the best jewelry store burglary prevention advice — putting everything away at night — is often taken as a light suggestion, rather than as a must-do.” Its holiday checklist says “Any merchandise that cannot fit inside a safe or vault should be moved to a locked interior room, cabinet, or drawer — never left visible in showcases.” JSA agrees: “Don't leave merchandise out at night in showcases.” None of that involves glass.

For the storefront, the same holiday checklist says: “Keep entryways and windows unobstructed for maximum visibility.” Our reading, not theirs: ask about clear film rather than dark or mirrored film.

On safes, Jewelers Mutual says to look for “A UL burglary rating that aligns with your risk level” and, before buying, to “consult with your agent or security professional to ensure your selection aligns with your risk profile and insurance requirements.” It names no class. Its risk-management page says its vetted providers “meet insurance coverage requirements,” without publishing what those are, and its product page lists “Show window coverage” among coverage options, which makes what your policy includes a question for your agent. Jewelers Mutual is also candid about limits: “There is never a guarantee that your jewelry store won't fall victim to a smash-and-grab robbery.”

Where Film Fits

Film and overglaze: options, not obligations

Nothing above makes any product mandatory, so what follows is where our work fits. We install security window film on storefront glass and doors. Security film is engineered to resist breakthrough and can slow an attack, which buys time, but we will not say it stops a determined crew. Our post on whether security film stops break-ins and our film, laminated glass and replacement comparison cover the tradeoffs, and our security window film page shows what we install.

Where a storefront needs more than film, overglaze polycarbonate is a panel system installed over existing glass. We work with the DefenseLite retrofit from Impact Security, described on our DefenseLite and BulletShield page. Jewelers Mutual’s security directory says “Impact Security engineers forced-entry and bullet resistant retrofit glazing products,” and it lists 3M’s security window films as well. The directory also says Jewelers Mutual “neither guarantees nor warrants the services and products provided by the companies listed.” A listing for a maker is not a statement about any installer. We also do door reglaze. For any retrofit, ask for the maker’s report on the exact assembly, frame and anchoring included.

Display cases are a separate question from storefront glass, so start with your case supplier or the case maker. For a sense of what makers say, Impact Security describes its CaseShield as “A retrofit polycarbonate glazing system that protects display cases and case-lines from smash-and-grab theft,” and its blog says “the framing structure of most display cases is not designed to accommodate thicker glass or polycarbonate.” Those are the maker’s words about its own product. The page we read claims no UL 972 or ASTM rating for it, so ask for documentation. Laminated case glass, which Jewelers Mutual and JSA name, is likewise for your case supplier.

Be clear on what storefront film and overglaze do not do. They do not touch a smash of an in-store case while you are open, and they do not address roof, wall or safe attacks, where JSA reports its largest losses.

California And Local Rules

California and LA/Orange County: what we checked

We did not find a California or LA/Orange County rule that tells a jewelry store what glass to use. That describes what we searched on November 15, 2026. We read the full text of California’s Secondhand Goods chapter, Business and Professions Code sections 21500 to 21672, and searched it for security, alarm, vault, glass, window, display, camera, video, surveillance, lock and safe. Every hit was off-topic (photographs of sellers, security for a loan, swap-meet rules), with no hits for alarm, vault, glass, window, camera, surveillance, lock or safe. That chapter regulates reporting and holding, not your glass.

We also ran a web search for Los Angeles municipal code rules on jewelry-store security and glass and found nothing we could confirm as jewelry-specific. We did not search each Orange County city’s code, the unincorporated county code, the Penal Code or the Fire Code, and we did not read California’s pawnbroker law. Cities have their own building and permit rules for doors and glazing, so ask the building department before any work.

Before You Order Anything

Questions for your agent, your installer and your city

  • Does my policy require anything for glass, display cases or safes? Ask your agent, in writing. Policy wording is not public, and the insurer’s published tips are advice.
  • Which standard, which edition, which tested assembly? If a quote cites UL 972, ask for the maker’s listing or report for that exact material, and remember the standard does not cover mounting.
  • Who handles the display cases? Start with your case supplier or the case maker; case glass and frames are a different product from storefront glass.
  • Clear or tinted? Jewelers Mutual advises keeping windows unobstructed. Ask which film options keep the view into the store.
  • Permit and landlord? If you lease, ask your landlord before changing storefront glass, and ask the building department whether the exact product and openings need a permit.

Prefer to talk it through? Call us at (310) 488-5626 or 888-960-TINT. We will tell you what we can do and what belongs to someone else.

Questions

Jewelry store security glass: FAQ.

Does my jewelers block insurance require security glass or film?

Not in anything we could read. Jewelers Mutual Group's published pages treat glass and showcase protection as advice, using words like “consider” and “make sure,” and they refer to “insurance requirements” without publishing any. Policy wording is not public, so we cannot say what your policy requires. Ask your agent, in writing, whether it requires anything for glass, display cases or safes.

What is UL 972, and what does it say about display cases?

UL 972 is the standard for burglary resisting glazing material. Its scope says the material is meant “principally as a substitute for plate glass show windows or show case panels” and “is intended to resist burglarious attacks of the ‘hit and run’ type.” It does not cover mounting, so the frame and installation are outside what the standard addresses. The Department of Defense describes the testing as a steel ball dropped from different heights, at a level below the “very low forced entry severity level.” That is a measure of a glazing material, not a promise about a whole case, and not a rating for security film by itself.

Laminated or tempered glass: which do insurers recommend for jewelry showcases?

In the pages we read, Jewelers Mutual calls laminated glass “the most secure option” and says tempered glass “does little to safeguard the jewelry beneath it.” The Jewelers' Security Alliance advises showcases with “burglary-resistant, laminated glass on the front and sides, and special frames.” Both stress the frame and the installation. These are recommendations, and neither source, as we read it, says a glass type is required.

Where does security window film fit at a jewelry store?

On the storefront glass and doors, not inside the case. The Jewelers' Security Alliance (JSA) describes “Three Minute Burglaries” as a smash through a glass front door or window followed by a smash of the display cases, so the storefront glass is the first step. Film is engineered to resist breakthrough and can slow an attack, but it does not touch an open-hours smash of an in-store case, and JSA's 2025 entry-point table lists wall entry at 19.1% of burglaries against 13.0% for windows. JSA cautions that its counts rest on cases reported to it. Case protection is a separate product to discuss with your case supplier. Security film is not a ballistic product and is not a UL 972 rating by itself.

Does California or LA/Orange County have rules for jewelry store windows?

We did not find a California or LA/Orange County rule that tells a jewelry store what glass to use. We searched the state's Secondhand Goods chapter (Business and Professions Code sections 21500 to 21672) for security, alarm, vault, glass, window, display, camera, video, surveillance, lock and safe, and nothing in it addressed glazing. We did not search every Orange County city code, the Penal Code or the Fire Code, so check with your city's building department.

Sources

Where these findings came from.

We read the pages and reports below on November 15, 2026. Insurer pages and maker pages are marketing and guidance, not policy wording, and they change often. JSA figures are from its 2025 report and carry the limits quoted above. We did not read any insurer’s policy forms, other insurers’ guidance, every Orange County city code or California’s pawnbroker law. Confirm current text with the source before you rely on any of this.

  1. Jewelers Mutual Group, 10 Tips to Prevent Smash-and-Grab Robberies at Enclosed Malls; Jewelry Showcases: 2 Factors for Optimal Physical Security; Jewelry Store Burglary Prevention: Overcome Obstacles at Closing Time; Holiday Readiness for Jewelers; Safes for jewelers: What to consider before you buy. Insurer guidance, read November 15, 2026. Tips; Showcases; Closing; Holiday; Safes.
  2. Jewelers Mutual Group, Jewelers Block Insurance; Jewelry Business Risk Management; Security directory. Insurer product and guidance pages. Block; Risk management; Directory.
  3. Jewelers’ Security Alliance, 2025 Annual Crime Report. Nonprofit trade crime-prevention association. Link.
  4. UL Standards & Engagement, UL 972, Burglary Resisting Glazing Material (scope page) and UL 687, Burglary-Resistant Safes (scope page). Standards body. UL 972; UL 687.
  5. U.S. Department of Defense, UFGS 08 34 01 (August 2009), notes on UL 972. Federal guide specification. Link.
  6. California Legislative Information, Business and Professions Code, Division 8, Chapter 9, Secondhand Goods (sections 21500–21672). State statute. Link.
  7. Impact Security, LLC (DefenseLite), CaseShield and Smash and Grab Prevention. Manufacturer. CaseShield; Blog.

Keep Reading

Security Glass for California Pharmacies: What DEA and Board of Pharmacy Rules Say (and What They Don't)

Another retail category where the rules are detailed about drugs and keys, and quiet about glass.

Read the post →

Security Glass for Bank Branches and Credit Unions: What Federal Rules Require (and What They Leave to You)

What the federal bank and credit union texts say about glass, and where film and overglaze fit.

Read the post →

Forced-Entry, Ballistic and Blast Ratings for Glass: What ASTM F1233, F3561, TP-0500 and UL 752 Actually Test

What each rating measures, and what to ask for before you rely on one.

Read the post →

Thinking about your storefront glass?

Start by asking your agent what your policy requires, in writing. Then call us and we will talk through the storefront, what film or overglaze can and cannot do, and what belongs to your case supplier. If it turns out to be a fit, we put the product and the terms in writing. Call (310) 488-5626 or 888-960-TINT.

Get a Free Assessment
CALL TEXT QUOTE